Bucket Mould

Zhilian mould has rich experience in manufacturing different kinds of bucket moulds, such as different liters' water bucket mould, paint bucket mould, fishing bucket mould, thin-wall bucket, bucket cover and handle moulds.

1.Professional in making Bucket,BMC,DMC ect. thermoset plastic moulds;
2.Even heating and thermal cycle system: which can help to a large extend about product's deformation;
3.Control well about the flashes for the Bucket mould to reduce cost;
4.Smooth cavity for Bucket mould to make it easy for part demoulding;
5.Good after-service system: Provide spare parts free of charge within one year.
provide all-round technical solutions to any problems occurred in customers' mould operation lifelong maintains.

A. Caused the bucket wall thickness not even?
1.optimal and equal cooling effects in different area of bucket mould cavity and core.
2.the high and angle of the bucket moulds interlock system.
3.the machining process to the bucket moulds cavity and cores will cause the eccentric.

B. the explain regarding the pail mould core eccesntric causing the pail wall thickness not even and the pail out of center.
1. if the cooling is not equal in the different area of the pail mould core and cavity, this will cause the following difference of the melted material, the more hot area flowance will be bigger and the colder area the flowance will be smaller. then the hot area's pail wall thickness will be thicker. The temperature difference normally caused at least 0.05mm...
2.normally, the pail mould the interlock height should be 20 to 30% of the plastic pail's height, for example the smaller pail should be 20%, the bigger pail mould should be around 30% height.
3.the machining process is meaning which kind of machining should we select and what we should take care when we make the machining to the pail mould core and cavity.